EXOUT-M05 Extension Module with Currents and Relays

The MCC200 series multi-parameter controller developed and produced by Daruifuno supports the simultaneous connection of 4-8 identical or different digital sensors to achieve real-time monitoring of water quality parameters. However, the MCC200 multi-channel Water Quality Analyzer itself is not equipped with relays and current outputs for its miniaturization and lightweight considerations. If customers have control, alarm, dosing needs, and 4-20mA current output needs, they need to purchase the expansion module we developed. This extension module has 5 channels of 0/4-20mA current output, 16-bit resolution, and 5 settable relays. The extension module is external and easy to install. It does not need to be built into the controller and does not require complex wiring process.

Specification

Model	EXOUT-M05
Rated Voltage	12V
Allow Range	9~36V
Consumption	5W
Reverse polarity protection	support
Interface with host device	RS485, Modbus-RTU
Analog output quantity	5 ways
Output current range	0/4~20mA
Load impedance maximum (within rated output range)?	1000 ohm
Overrange resolution maximum (bits including sign)?	16 bit
Relay output quantity	5 ways
Switching capacity maximum (DC) (under resistive load)	3A, 30V
Switching capacity maximum (AC) (under resistive load)	3A, 250V
Operating temperature	0~60℃
Storage temperature	-2~70℃
Maximum relative humidity	95%, no condensation
Installation method	Wall mount, 35mm DIN rail
Applicable wire	0.2~2.5mm2, 24~12AWG
Dimension	wide: 175mm, height: 90mm, depth: 40mm
Weight	250g

Delfino specializes in the development and production of water quality instruments. Our main products include PH ORP analyzer, conductivity analyzer, turbidity analyzer, COD analyzer, dissolved oxygen analyzer, ammonia analyzer, chlorine analyzer, etc. If you are interested in the use of this extension module, you can also check our video section to see the relevant usage methods.